Bauer BEF1 Deburring Machine 415V

The Bauer BEF1 is ideal for the deburring of round/square tube and solid materials. A powerful motor drives a wire brush wheel and rapidly removes internal and external burrs in a single operation. The machine is produced with a two speed motor for effective finishing of ferrous and non ferrous metals.

Bauer BEF1 Deburring Machine 415V
Download PDF Spec Sheet Bauer BEF1 Deburring Machine 415V Download PDF Spec Sheet

Download
PDF Spec Sheet

Read More Bauer BEF1 Deburring Machine 415V Read More

Read
More

Get In Touch Get In Touch

Get In
Touch

Features

  • Wire brush deburring
  • 2 speed motor
  • Height adjustable material rest

Options

  • Various gauge wire brush wheels available

Technical Information

MODEL   BEF1
Max tube Capacity mm 50
Speeds RPM 1500 / 3000
Motor Kw 2.2-3.0
Weight kg 60

 

Advantages of geared head auto feed drilling machines

Advantages of geared head auto feed drilling machines

A geared head pillar drill with automatic spindle feed is a valuable addition to most workshops. This design allows the rapid selection of spindle speeds via levers on the front of the machine saving time over traditional belt drive changes. Automatic feed allows deep holes or holes through large sections to be drilled automatically, without operator intervention. So what other features should be considered if purchasing a machine of this type?

Read More

Read More
Sheet and tube fibre laser comes to the Bison showroom!

Sheet and tube fibre laser comes to the Bison showroom!

We are pleased to announce that we have invested in the latest fibre laser technology with the RVD SmartFibre PR Laser, with optional Tube Cutting Attachment, now installed in our showroom in Stafford. This versatile model offers both sheet and tube cutting on the same machine, with the laser cutting head moving quickly from the sheet cutting table to the tube cutting zone.

Read More

Read More
Automatic sawing with programmable mitre cutting

Automatic sawing with programmable mitre cutting

For many years fabricators have proved the benefit of automatic saws to produce small parts from long bar stock. Setting an automatic bandsaw to cut 100 off 25mm long components is a massive productivity boost when compared to an operator producing these manually. Many saws however are set up for 90 degree - or straight cutting - only. So what are the options if mitred components are required?

Read More

Read More
Bump bending a radius using a press brake

Bump bending a radius using a press brake

Are you using bending rolls to form a radius in sheet or plate material? This is by far the easiest option if you are rolling a full cylinder or a partial segment, but what about if you need a curve between two flat parts with accurate dimensions? This can be tricky, but there is another option……

Read More

Read More
  • Follow Our Social Channels