Morgan Rushworth MS, PS & HPS Swaging Machines

Read More Get In Touch
Morgan Rushworth MS, PS & HPS Swaging Machines

The Morgan Rushworth PS 250/1.25 swaging machine is an electrically powered unit. Swaging machines are designed to form various shapes to sheet material and are particularly suited for tubular ductwork applications. Easily interchangeable rolls are included as standard equipment to form the specific shape required.

Why Choose a Morgan Rushworth Swaging Machine?

  • Steel welded frame
  • Adjustable idler roll
  • Adjustable end stop
  • Reduction motor with brake
  • 3 sets of standard rolls
  • Optional special rolls avaiable
Advantages of geared head auto feed drilling machines

Advantages of geared head auto feed drilling machines

A geared head pillar drill with automatic spindle feed is a valuable addition to most workshops. This design allows the rapid selection of spindle speeds via levers on the front of the machine saving time over traditional belt drive changes. Automatic feed allows deep holes or holes through large sections to be drilled automatically, without operator intervention. So what other features should be considered if purchasing a machine of this type?

Read More

Read More
Sheet and tube fibre laser comes to the Bison showroom!

Sheet and tube fibre laser comes to the Bison showroom!

We are pleased to announce that we have invested in the latest fibre laser technology with the RVD SmartFibre PR Laser, with optional Tube Cutting Attachment, now installed in our showroom in Stafford. This versatile model offers both sheet and tube cutting on the same machine, with the laser cutting head moving quickly from the sheet cutting table to the tube cutting zone.

Read More

Read More
Automatic sawing with programmable mitre cutting

Automatic sawing with programmable mitre cutting

For many years fabricators have proved the benefit of automatic saws to produce small parts from long bar stock. Setting an automatic bandsaw to cut 100 off 25mm long components is a massive productivity boost when compared to an operator producing these manually. Many saws however are set up for 90 degree - or straight cutting - only. So what are the options if mitred components are required?

Read More

Read More
Bump bending a radius using a press brake

Bump bending a radius using a press brake

Are you using bending rolls to form a radius in sheet or plate material? This is by far the easiest option if you are rolling a full cylinder or a partial segment, but what about if you need a curve between two flat parts with accurate dimensions? This can be tricky, but there is another option……

Read More

Read More

Business Details

  • Follow Our Social Channels