Bianco CNC Automatic Vice Feed Double Mitring Bandsaws

Read More Get In Touch
Bianco CNC Automatic Vice Feed Double Mitring Bandsaws

The Bianco double mitre automatic range offer automatic bow swing in addition to the automatic material feeding system. Both of these functions are controlled through the CNC control panel or by offline programming. The first cut is selected at any angle between 45 degrees left and 60 degrees right. The required length is then then selected by choosing the internal or external measurement and then the last cutting angle is selected between 45 degrees left and 60 degrees right. Finally the total number of components are entered. Optional magazine systems are also available to further increase productivity. All Bianco machines are manufactured in Italy to high quality standards with accuracy and longevity as prime considerations. 

Why Choose a CNC Double Mitre Bianco?

  • CNC automatic programmer controlling cutting lengths, cutting quantities and angle of cut left and right
  • Hydraulic cutting with variable pressure and variable speed
  • Hydraulic Vice
  • Fast approach with auto bow height return setting
  • Cast bow construction
  • Carbide blade guides for high accuracy
  • Quick mitring swivel head up to 60º
  • Fully automatic cutting cycle with hydraulic vice feed system
  • Shuttle vice facility for long cutting lengths
  • Hydraulic left and right bow swing
  • Chip conveyor
  • Powered swarf brush
Automatic sawing with programmable mitre cutting

Automatic sawing with programmable mitre cutting

For many years fabricators have proved the benefit of automatic saws to produce small parts from long bar stock. Setting an automatic bandsaw to cut 100 off 25mm long components is a massive productivity boost when compared to an operator producing these manually. Many saws however are set up for 90 degree - or straight cutting - only. So what are the options if mitred components are required?

Read More

Read More
Bump bending a radius using a press brake

Bump bending a radius using a press brake

Are you using bending rolls to form a radius in sheet or plate material? This is by far the easiest option if you are rolling a full cylinder or a partial segment, but what about if you need a curve between two flat parts with accurate dimensions? This can be tricky, but there is another option……

Read More

Read More
Increase folding productivity with a ‘Combi Beam’ Folder

Increase folding productivity with a ‘Combi Beam’ Folder

Straight and box & pan folding on one machine! Or even within one part. Do you need a straight folding blade to produce precise long folds in sensitive material? But need the flexibility of segmented tools for more complex designs?

Read More

Read More
Morgan Rushworth 4-Roll NC Plate Bending Rolls

Morgan Rushworth 4-Roll NC Plate Bending Rolls

The Morgan Rushworth 4 Roll Hydraulic Plate Bending Rolls are a proven success story with many successful installations around the world. The addition of an NC control allows a skilled operator to program a job ready for production by any trained personnel.

Read More

Read More

Business Details

  • Follow Our Social Channels