Morgan Rushworth XPE 2100.50 Servo Electric Press Brake 415V

The Morgan Rushworth XPE range of servo electric pressbrakes are designed with a belt and pulley system providing low energy useage, high bending cycle times and high accuracy. The range spans from 1530mm x 40T machines up to 3100mm x 100T, with all models equipped with the ESA VIS-875W 2D CNC touch screen controller. The combination of consistent pressure across the beam from the pulley system, high positioning accuracy of 0.01mm and the O frame design with virtually no flex results in a level of accuracy far higher than in conventional hydraulic machines. The side frames are fitted at each end of the machine meaning that the backgauge can be used for the full width of the machine to the maximum depth. The XPE Servo electric pressbrakes are far more reliable than hydraulic machines with no rams, seals, pumps, pipes etc resulting in less down time.

Download PDF Spec Sheet

Download
PDF Spec Sheet

Read More Morgan Rushworth XPE 2100.50 Servo Electric Press Brake 415V

Get In Touch

Get In
Touch

Features

Approximately 50% less energy use compared with hydraulic machines
Approximately 30% faster cycle times
Approximately 75% less servicing costs than hydraulic machines
Green technology – no oil or hazardous waste affecting the environment
Even pressure across the bending beam negates requirement for crowning systems
frame design results in minimum distortion
Almost noiseless operation
X and R axis backgauge
ESA VIS-875W 2D CNC touch screen controller
Offline programming functionality on office PC

Options

Multi axis backguages
Hydraulic tool clamping
Laser angle measuring system
Sheet follower support arms
Optional off line ESA Bend 3D Software with Control Viewer

Technical Information

MODEL		XPE 2100.50
Bending Power	tonne	50
Bending Length	mm	2100
Y Axis Approach Speed	mm/sec	150
Y Axis Bending Speed	mm/sec	10
Y Axis Return Speed	mm/sec	150
X Axis Travel	mm	750
R Axis Travel	mm	160
No of Back Gauge Fingers		2
No of Sheet Support Arms		2
Stroke	mm	240
Daylight	mm	505
Motor Power	kW	2 x 5.5
Nominal Power (excluding options)	kW	20.7
Length	mm	3300
Width	mm	1850
Height	mm	2525
Weight	kg	5600

View More Products From This Range

The Bison Blog

View All Blog Articles

A unique solution for welding fume extraction

In recent years, the Health and Safety Executive (HSE) has placed welding fumes under closer scrutiny, with scientific evidence linking exposure to a range of health issues, including lung cancer, neurological disorders, and asthma. Employers have a duty to provide a safe and healthy working environment for their staff, which includes putting effective controls in place to manage exposure to welding fumes — general ventilation on its own is not enough to adequately mitigate the risks. Although welders themselves may be adequately protected by PPE, the HSE has placed particular emphasis on other employees who share the same workspace.

Carbon Footprint Reduction for UK Metal Fabricators: Where to Start

Net zero isn't just a government target, it's increasingly a commercial reality. More and more UK manufacturers are being asked by their customers to demonstrate their environmental credentials, and fabrication businesses that can't answer that question are starting to lose work to those that can.

Autorolling© - Combining Davi’s three most advanced technologies

In today’s metal fabrication landscape, precision, efficiency, and sustainability are no longer optional—they are baseline requirements. Davi Autorolling© answers this demand by unifying three breakthrough technologies into a single, intelligent plate rolling ecosystem.

Navigating the Challenges of Compliance in Structural Steel Fabrication

If you spend any time in a modern steel fabrication workshop, you’re likely to hear the same theme repeated: compliance has become tougher, more scrutinised and more central to winning work. Clients want reassurance, auditors want documentation, and insurers want evidence...