Meyer Euroline ER 440/1500 Precision Centre Lathe

The Meyer Euro Line range of precision centre lathes are of robust construction and are designed and manufactured in Europe using high quality materials and with stringent quality control procedures. The ER and ES models span a range from a small tool room lathe with 325mm swing over bed and 500mm between centres, up to 600mm swing over bed with 5 metres between centres. All models come with thread cutting as standard in a large range of metric, imperial, module and diametric pitches. Many models can be supplied with an optional infinitely variable speed configuration with a number of sub ranges.

Download PDF Spec Sheet

Download
PDF Spec Sheet

Read More Meyer Euroline ER 440/1500 Precision Centre Lathe

Get In Touch

Get In
Touch

Features

High quality European built machines
Rigid build ensures high chip removal rate during the rough turning operation
Highly resistant steel with high loading capacity used for all gear and spindle parts
Cast bed with hardened and ground bed ways
Gap bed design
Rapid traverse
Four position square toolpost
Chuck guard with interlock switch
Lead screw guard
Low voltage halogen work light
Centralised lubrication
Chip collection tray
Coolant system
Full length rear splash guard

Options

2 or 3 axis digital read out
Thread dial indicator
Quick change tool post
3 and 4 jaw chucks
Face plate
Fixed steady
Follow rest

Technical Information

Capacities
Height of Centres	mm	210
Swing over Bed	mm	440
Swing over Cross Slide	mm	230
Swing in Gap	mm	620
Width of Bed	mm	360
Distance between Centres	mm	1500
Headstock
Spindle Nose (DIN55027)	No	8
Spindle Bore	mm	62
Spindle Taper	Metric	80
Number of Spindle Speeds	No	21
Spindle Speed Range	RPM	20 - 2000
Main Motor Power	kW	7.5
Feed Rates
Number of Feeds	No	120
Longitudinal Feed Range	mm/rev	0.04 - 12
Cross Feed Range	mm/rev	0.02 - 6
Threads
Metric Thread Range/No of Steps	mm	0.5 - 120
Imperial Thread Range/No of Steps	TPI	60 - 1/4
Module Thread Range/No of Steps	Module	0.125 - 30
DP Thread Range/No of Steps	DP	240 - 1
Carraige
Cross Slide Travel	mm	250
Top Slide Travel	mm	130
Tailstock
Quill Diameter	mm	70
Quill Taper	MT	5
Quill Travel	mm	180
Dimensions
Length	mm	3400
Width	mm	1100
Height	mm	1700
Weight	kg	2430

View More Products From This Range

The Bison Blog

View All Blog Articles

A unique solution for welding fume extraction

In recent years, the Health and Safety Executive (HSE) has placed welding fumes under closer scrutiny, with scientific evidence linking exposure to a range of health issues, including lung cancer, neurological disorders, and asthma. Employers have a duty to provide a safe and healthy working environment for their staff, which includes putting effective controls in place to manage exposure to welding fumes — general ventilation on its own is not enough to adequately mitigate the risks. Although welders themselves may be adequately protected by PPE, the HSE has placed particular emphasis on other employees who share the same workspace.

Carbon Footprint Reduction for UK Metal Fabricators: Where to Start

Net zero isn't just a government target, it's increasingly a commercial reality. More and more UK manufacturers are being asked by their customers to demonstrate their environmental credentials, and fabrication businesses that can't answer that question are starting to lose work to those that can.

Autorolling© - Combining Davi’s three most advanced technologies

In today’s metal fabrication landscape, precision, efficiency, and sustainability are no longer optional—they are baseline requirements. Davi Autorolling© answers this demand by unifying three breakthrough technologies into a single, intelligent plate rolling ecosystem.

Navigating the Challenges of Compliance in Structural Steel Fabrication

If you spend any time in a modern steel fabrication workshop, you’re likely to hear the same theme repeated: compliance has become tougher, more scrutinised and more central to winning work. Clients want reassurance, auditors want documentation, and insurers want evidence...