Meyer Euroline EX Precision Centre Lathes

Read More Get In Touch
Meyer Euroline EX Precision Centre Lathes

The Meyer Euro Line range continues with the high capacity EV, EX & EC models, featuring wider bed designs and high powered motors.  The EX range includes the EX 1410 model with the 1410mm swing over bed and, by special request, up to 9000mm distance between centres.  The EC models offer a very large bore through the headstock and can be offereed with additional free standing steadies for working with longer material lenghts.  All models can be offered in a variable speed version as well as with a wide range of optional features and accessories.  As with the smaller models, these machines offer thread cutting in a large range of types and pitches.

Why choose a Meyer Euroline EX lathe?

  • High quality European built machines 
  • Rigid build ensures high chip removal rate during the rough turning operation
  • Highly resistant steel with high loading capacity used for all gear and spindle parts
  • Cast bed with hardened and ground bed ways
  • Gap bed design
  • Variable spindle speed
  • Rapid traverse
  • Four position square toolpost
  • Chuck guard with interlock switch
  • Lead screw guard
  • Low voltage halogen work light
  • Centralised lubrication
  • Chip collection tray
  • Coolant system

Model Range

Get In Touch
Automatic sawing with programmable mitre cutting

Automatic sawing with programmable mitre cutting

For many years fabricators have proved the benefit of automatic saws to produce small parts from long bar stock. Setting an automatic bandsaw to cut 100 off 25mm long components is a massive productivity boost when compared to an operator producing these manually. Many saws however are set up for 90 degree - or straight cutting - only. So what are the options if mitred components are required?

Read More

Read More
Bump bending a radius using a press brake

Bump bending a radius using a press brake

Are you using bending rolls to form a radius in sheet or plate material? This is by far the easiest option if you are rolling a full cylinder or a partial segment, but what about if you need a curve between two flat parts with accurate dimensions? This can be tricky, but there is another option……

Read More

Read More
Increase folding productivity with a ‘Combi Beam’ Folder

Increase folding productivity with a ‘Combi Beam’ Folder

Straight and box & pan folding on one machine! Or even within one part. Do you need a straight folding blade to produce precise long folds in sensitive material? But need the flexibility of segmented tools for more complex designs?

Read More

Read More
Morgan Rushworth 4-Roll NC Plate Bending Rolls

Morgan Rushworth 4-Roll NC Plate Bending Rolls

The Morgan Rushworth 4 Roll Hydraulic Plate Bending Rolls are a proven success story with many successful installations around the world. The addition of an NC control allows a skilled operator to program a job ready for production by any trained personnel.

Read More

Read More

Business Details

  • Follow Our Social Channels