Promotech ABM28 Bevelling Machine

The Promotech ABM28 model is an automatic feeding machine with the ability to bevel the top side, the under side and to face the edges of plate material.  The bevel angle is infinitely variable to plus or minus 60 degrees with the machine also capable of producing the J-groove bevel form.  The ABM28 includes a unique 2.4m quick clamp rail system reducing the tendency for "wander" and ensuring secure, straight and true feeding of the machine resulting in a perfect bevel.  Optional additional guide rails are available for the bevelling of large plates.

Promotech ABM28 Bevelling Machine
Download PDF Spec Sheet Promotech ABM28 Bevelling Machine Download PDF Spec Sheet

Download
PDF Spec Sheet

Read More Promotech ABM28 Bevelling Machine Read More

Read
More

Get In Touch Get In Touch

Get In
Touch

Features

  • Variable speed
  • Abilityto bevel top, under side and facing of plates
  • Variable angle bevelling from -60º to +60º
  • Can operate in either direction
  • Milling head with seven cutters, each with four cutting sides
  • Motor overload protection
  • Swarf collection box

Options

  • Milling head with J bevel with radius of 6mm with six cutters or 8mm with five cutters
  • 1.2m additional guide raiil
  • Additional guide rail clamps
  • Attachment for bevelling plate from 36mm to 70mm

Technical Information

Model   ABM28
Stock Code   17356
Max Bevel width at 45º mm 28
Bevel angle degrees -60 to +60
Plate thickness mm 10 - 35
Spindle speed rpm 2780
Feed Speed mm/min 250-500
Motor kW 1.6
Weight kg 48
Advantages of geared head auto feed drilling machines

Advantages of geared head auto feed drilling machines

A geared head pillar drill with automatic spindle feed is a valuable addition to most workshops. This design allows the rapid selection of spindle speeds via levers on the front of the machine saving time over traditional belt drive changes. Automatic feed allows deep holes or holes through large sections to be drilled automatically, without operator intervention. So what other features should be considered if purchasing a machine of this type?

Read More

Read More
Sheet and tube fibre laser comes to the Bison showroom!

Sheet and tube fibre laser comes to the Bison showroom!

We are pleased to announce that we have invested in the latest fibre laser technology with the RVD SmartFibre PR Laser, with optional Tube Cutting Attachment, now installed in our showroom in Stafford. This versatile model offers both sheet and tube cutting on the same machine, with the laser cutting head moving quickly from the sheet cutting table to the tube cutting zone.

Read More

Read More
Automatic sawing with programmable mitre cutting

Automatic sawing with programmable mitre cutting

For many years fabricators have proved the benefit of automatic saws to produce small parts from long bar stock. Setting an automatic bandsaw to cut 100 off 25mm long components is a massive productivity boost when compared to an operator producing these manually. Many saws however are set up for 90 degree - or straight cutting - only. So what are the options if mitred components are required?

Read More

Read More
Bump bending a radius using a press brake

Bump bending a radius using a press brake

Are you using bending rolls to form a radius in sheet or plate material? This is by far the easiest option if you are rolling a full cylinder or a partial segment, but what about if you need a curve between two flat parts with accurate dimensions? This can be tricky, but there is another option……

Read More

Read More
  • Follow Our Social Channels