Morgan Rushworth Hydraulic H-Frame Presses

Read More Get In Touch
Morgan Rushworth Hydraulic H-Frame Presses

The Morgan Rushworth H-Frame presses are ideal for a whole variety of bending, forming, pressing and straightening operations. They extend from 30 tonnes capacity up to an extra powerful 200 tonne model with a choice of distances between the frames. The HFP versions feature a monometer and a joystick lever to control the operation with a pair of V blocks being supplied as standard equipment.  The HFPV model is equipped with a moveable hydraulic ram which is able to traverse the bed. This enables multiple tool sets to be installed on the bed, providing the operator the capability to carry out a number of various pressings without requiring a tool change.  The HFPX machines include a strong well dimensioned, height adjustable bed with tee slots to secure tooling. The top beam, also fitted with tee slots, has a powerful central hydraulic ram with two guide pistons providing stability. Adjustable limit switches ensure a precise consistent pressingn operation.

Why Choose an H-Frame Press?

  • Easily adjusted bed height with two hardened pins
  • Bed designed to accept a variety of supports and jigs according to customer requirements
  • Quiet hydraulic system
  • Hydraulic cylinder mounted above providing vertical pressure
  • Side to side ram movement across the width of the machine
  • Ideal for low or high volume operation.
Automatic sawing with programmable mitre cutting

Automatic sawing with programmable mitre cutting

For many years fabricators have proved the benefit of automatic saws to produce small parts from long bar stock. Setting an automatic bandsaw to cut 100 off 25mm long components is a massive productivity boost when compared to an operator producing these manually. Many saws however are set up for 90 degree - or straight cutting - only. So what are the options if mitred components are required?

Read More

Read More
Bump bending a radius using a press brake

Bump bending a radius using a press brake

Are you using bending rolls to form a radius in sheet or plate material? This is by far the easiest option if you are rolling a full cylinder or a partial segment, but what about if you need a curve between two flat parts with accurate dimensions? This can be tricky, but there is another option……

Read More

Read More
Increase folding productivity with a ‘Combi Beam’ Folder

Increase folding productivity with a ‘Combi Beam’ Folder

Straight and box & pan folding on one machine! Or even within one part. Do you need a straight folding blade to produce precise long folds in sensitive material? But need the flexibility of segmented tools for more complex designs?

Read More

Read More
Morgan Rushworth 4-Roll NC Plate Bending Rolls

Morgan Rushworth 4-Roll NC Plate Bending Rolls

The Morgan Rushworth 4 Roll Hydraulic Plate Bending Rolls are a proven success story with many successful installations around the world. The addition of an NC control allows a skilled operator to program a job ready for production by any trained personnel.

Read More

Read More

Business Details

  • Follow Our Social Channels