Morgan Rushworth HSW Hydraulic Compact Steelworkers

Read More Get In Touch
Morgan Rushworth HSW Hydraulic Compact Steelworkers

The HSW 45 and HSW 60 compact universal hydraulic steelworkers with 5 workstations and have been designed for volume production with maximum efficiency. Punching, shearing, cropping and notching can be carried out instantly by pressing the moveable foot pedal. The low power inch mode on each workstation enables correct workpiece positioning and tool alignment. Limit-switches allow accurate adjustment of the stroke length to minimise operational time depending on material thickness. At the angle cutting station, angle iron can be cut on every angle from 45º up to 90º, both internal and external with standard tooling. 

Why Choose HSW?

  • PUNCH STATION
    Easy tool change system and swing away stripper with fast manual adjustment ensure a quick setup.
  • ANGLE STATION
    Angle iron can be cut at any angle between 45º and 90º, with either internal or external mitres.
  • SECTION CUTTING STATION
    Cropping of round and square bar is easily performed with the standard blades. Optional blades and hold downs are available to crop special profiles.
  • SHEARING STATION
    Specially designed blade approach angle cuts thin and thick material with minimum distortion.
  • NOTCHING STATION
    This versatile unit is equipped with a rectangular notch unit as standard.
Automatic sawing with programmable mitre cutting

Automatic sawing with programmable mitre cutting

For many years fabricators have proved the benefit of automatic saws to produce small parts from long bar stock. Setting an automatic bandsaw to cut 100 off 25mm long components is a massive productivity boost when compared to an operator producing these manually. Many saws however are set up for 90 degree - or straight cutting - only. So what are the options if mitred components are required?

Read More

Read More
Bump bending a radius using a press brake

Bump bending a radius using a press brake

Are you using bending rolls to form a radius in sheet or plate material? This is by far the easiest option if you are rolling a full cylinder or a partial segment, but what about if you need a curve between two flat parts with accurate dimensions? This can be tricky, but there is another option……

Read More

Read More
Increase folding productivity with a ‘Combi Beam’ Folder

Increase folding productivity with a ‘Combi Beam’ Folder

Straight and box & pan folding on one machine! Or even within one part. Do you need a straight folding blade to produce precise long folds in sensitive material? But need the flexibility of segmented tools for more complex designs?

Read More

Read More
Morgan Rushworth 4-Roll NC Plate Bending Rolls

Morgan Rushworth 4-Roll NC Plate Bending Rolls

The Morgan Rushworth 4 Roll Hydraulic Plate Bending Rolls are a proven success story with many successful installations around the world. The addition of an NC control allows a skilled operator to program a job ready for production by any trained personnel.

Read More

Read More

Business Details

  • Follow Our Social Channels