Morgan Rushworth HST Hydraulic Multistation Steelworkers

Read More Get In Touch
Morgan Rushworth HST Hydraulic Multistation Steelworkers

The HST machines are supplied with standard tooling including repetition support tables at punch, shear and notch stations. All five work stations are equipped with easily adjustable hold downs to safely control each operation. A special unique feature of the HST Range is the hydraulic hold down stripper at the punch station. This reduces deformation, particularly when punching a series of holes in flat bar and increases tool life. Comprehensive safety guards are fitted as standard on all work stations. 

Why Choose HST?

  • PUNCH STATION
    Easy tool change system and swing away stripper with fast manual adjustment ensure a quick setup.
  • ANGLE STATION
    This station provides large capacity angle cutting at 90º and 45º. Angles between 45º and 90º can be achieved by first cutting at 90º and then flange trimming to the required angle in the shearing station.
  • SECTION CUTTING STATION
    The machines are fitted as standard with blades for cutting round and square bars. With extra equipment, the machines are able to cut, in this aperture, channel, joist, T-sections and many other special profiles.
  • NOTCHING STATION
    The notching station is fitted with a table with adjustable back stops allowing repetitive positioning.
  • SHEARING STATION
    The shearing unit is fitted with a simple robust holddown which is adjustable to any thickness of material within the cutting capacity of the machine. The shear feed table with adjustable guides is fitted to allow accurate feeding of materials. The guide can be adjusted to allow mitre cutting up to 45º for flat bars or to trim the flanges of angle.
  • AUTO CROP RULED LENGTH STOP
    Standard 1m stop with automatic shearing bypassing the foot switch for production applications. Can be used on all shear stations. Available in 2m and 3m options.
Automatic sawing with programmable mitre cutting

Automatic sawing with programmable mitre cutting

For many years fabricators have proved the benefit of automatic saws to produce small parts from long bar stock. Setting an automatic bandsaw to cut 100 off 25mm long components is a massive productivity boost when compared to an operator producing these manually. Many saws however are set up for 90 degree - or straight cutting - only. So what are the options if mitred components are required?

Read More

Read More
Bump bending a radius using a press brake

Bump bending a radius using a press brake

Are you using bending rolls to form a radius in sheet or plate material? This is by far the easiest option if you are rolling a full cylinder or a partial segment, but what about if you need a curve between two flat parts with accurate dimensions? This can be tricky, but there is another option……

Read More

Read More
Increase folding productivity with a ‘Combi Beam’ Folder

Increase folding productivity with a ‘Combi Beam’ Folder

Straight and box & pan folding on one machine! Or even within one part. Do you need a straight folding blade to produce precise long folds in sensitive material? But need the flexibility of segmented tools for more complex designs?

Read More

Read More
Morgan Rushworth 4-Roll NC Plate Bending Rolls

Morgan Rushworth 4-Roll NC Plate Bending Rolls

The Morgan Rushworth 4 Roll Hydraulic Plate Bending Rolls are a proven success story with many successful installations around the world. The addition of an NC control allows a skilled operator to program a job ready for production by any trained personnel.

Read More

Read More

Business Details

  • Follow Our Social Channels