Curvassi Universal Bending Machines

Read More Get In Touch
Curvassi Universal Bending Machines

The Curvassi machines a truly universal, acheiving fast and accurate bending in round and square tube, flat bar, round bar and square bar.  Thin wall tube is effortlessly bent to a tight radius with the aid of a mandrel bar, with capacity of up to 32mm diameter tube.  A centre line radius of 2.5 times the tube diameter can usually be achieved with very satisfactory results.  This machine is ideally suited to a production environment as a 180º bend is performed in just 3 seconds.

Why Choose a Curvassi Bending machine?

  • Bends round, square and flat bar and tube.
  • Bends mild steel, stainless steel and aluminium.
  • Ideal for bending thin wall tube to a ‘tight’ radius.
  • Ideal for bow top fencing in thin wall tube with the aid of a mandrel bar to provide a perfect finish. No wrinkling on inside and no flattening on outside of tube.
  • Ideal for bow top fencing in round bar. 12mm bar - 3 bows per bend 16mm bar - 2 bows per bend 20mm bar - 1 bow per bend
  • Very fast - 180° bend in 3 seconds.
Automatic sawing with programmable mitre cutting

Automatic sawing with programmable mitre cutting

For many years fabricators have proved the benefit of automatic saws to produce small parts from long bar stock. Setting an automatic bandsaw to cut 100 off 25mm long components is a massive productivity boost when compared to an operator producing these manually. Many saws however are set up for 90 degree - or straight cutting - only. So what are the options if mitred components are required?

Read More

Read More
Bump bending a radius using a press brake

Bump bending a radius using a press brake

Are you using bending rolls to form a radius in sheet or plate material? This is by far the easiest option if you are rolling a full cylinder or a partial segment, but what about if you need a curve between two flat parts with accurate dimensions? This can be tricky, but there is another option……

Read More

Read More
Increase folding productivity with a ‘Combi Beam’ Folder

Increase folding productivity with a ‘Combi Beam’ Folder

Straight and box & pan folding on one machine! Or even within one part. Do you need a straight folding blade to produce precise long folds in sensitive material? But need the flexibility of segmented tools for more complex designs?

Read More

Read More
Morgan Rushworth 4-Roll NC Plate Bending Rolls

Morgan Rushworth 4-Roll NC Plate Bending Rolls

The Morgan Rushworth 4 Roll Hydraulic Plate Bending Rolls are a proven success story with many successful installations around the world. The addition of an NC control allows a skilled operator to program a job ready for production by any trained personnel.

Read More

Read More

Business Details

  • Follow Our Social Channels