Baykal BPM-T CNC Turret Punch Presses

Read More Get In Touch
Baykal BPM-T CNC Turret Punch Presses

The Baykal BPM-T CNC Turret Punch Presses feature an extremely rigid ‘O’ frame design tested by Finite Element Analysis so that there is minimum deflection in the machine body even under maximum load and ensuring high precision performance. The machines are designed for high production with up to 1G acceleration when positioning and a maximum speed of 900 strokes per minute when nibbling at 1mm pitch. The 20 station turret features 4 indexable stations as standard which can be fitted with either 3 or 8 station multi tools. 

Why Choose Baykal BPM-T?

  • Extremely rigid ‘O’ Frame design tested by Finite Element Analysis software, precisely machined and stress relieved
  • High strength, centrally driven beam fitted with three sheet clamps providing up to 1G acceleration
  • Heavy duty and precise sheet clamps with sliding system to prevent sheet jamming. Three sensors ensure clamps are tightened to beam, material clamps are activated and that there is no movement in the material
  • High quality Rexroth Star ball bearings and linear guides allow extremely precise positioning as well as high speed movement
  • Ball transfer and brush table combination
  • Moveable table system in Y axis ensuring the material is supported at the edges and reducing vibrations
  • 20 station turret including 4 indexable D stations capable of holding 3 or 8 station multi tools , 2 fixed D stations, 2 fixed C stations and 12 fixed B stations
  • Capable of producing not only 2D components but when fitted with special tools can create 3D forms up to 8mm deep in 1mm material
Automatic sawing with programmable mitre cutting

Automatic sawing with programmable mitre cutting

For many years fabricators have proved the benefit of automatic saws to produce small parts from long bar stock. Setting an automatic bandsaw to cut 100 off 25mm long components is a massive productivity boost when compared to an operator producing these manually. Many saws however are set up for 90 degree - or straight cutting - only. So what are the options if mitred components are required?

Read More

Read More
Bump bending a radius using a press brake

Bump bending a radius using a press brake

Are you using bending rolls to form a radius in sheet or plate material? This is by far the easiest option if you are rolling a full cylinder or a partial segment, but what about if you need a curve between two flat parts with accurate dimensions? This can be tricky, but there is another option……

Read More

Read More
Increase folding productivity with a ‘Combi Beam’ Folder

Increase folding productivity with a ‘Combi Beam’ Folder

Straight and box & pan folding on one machine! Or even within one part. Do you need a straight folding blade to produce precise long folds in sensitive material? But need the flexibility of segmented tools for more complex designs?

Read More

Read More
Morgan Rushworth 4-Roll NC Plate Bending Rolls

Morgan Rushworth 4-Roll NC Plate Bending Rolls

The Morgan Rushworth 4 Roll Hydraulic Plate Bending Rolls are a proven success story with many successful installations around the world. The addition of an NC control allows a skilled operator to program a job ready for production by any trained personnel.

Read More

Read More

Business Details

  • Follow Our Social Channels