Morgan Rushworth HSR 50.160 Hydraulic Section Rolling Machine

The Morgan Rushworth HSR 50.160 hydraulic section bending machine is designed to roll various material sections. This model has a single hydraulic ram to adjust the top roll, and can be operated in either vertical or horizontal plain. The standard rolls supplied with the machine are hardened and have been designed to bend most sections, avoiding the cost of additional tooling. Lateral guide rolls ensure straight and true bending, or if required can be adjusted in order to spiral the material.

Download PDF Spec Sheet

Download
PDF Spec Sheet

Read More Morgan Rushworth HSR 50.160 Hydraulic Section Rolling Machine

Get In Touch

Get In
Touch

Features

All three rolls driven for excellent traction
Smooth rolls ensure minimum material marking
Hardened rolls
Moveable control panel

Options

Tube rolls
Digital read out indicating top roll position
NC control system

Technical Information

MODEL		HSR 50.160
Capacities
Flat Bar on Edge at 600mm Ø	mm	60 x 10
Flat Bar as Flat at 600mm Ø	mm	100 x 15
Square Bar at 600mm Ø	mm	35
Round Bar at 600mm Ø *	mm	35
Round Tube at 1200mm Ø *	mm	70 x 2
Round Pipe at 1000mm Ø *	mm	60.3 x 2.9
Rectangular Hollow Section at 1500mm Ø *	mm	70 x 30 x 3
Square Hollow Section at 1600mm Ø *	mm	50 x 50 x 3
Angle Iron Toe Out at 600mm Ø	mm	50 x 50 x 6
Angle Iron Toe In at 1200mm Ø	mm	50 x 50 x 5
Tee Section Toe Out at 600mm Ø	mm	60 x 60 x 7
Tee Section Toe In at 700mm Ø	mm	60 x 60 x 7
Tee Section Toe Up/Down at 700mm Ø	mm	60 x 60 x 7
Channel Legs Out at 800mm Ø *	mm	UPN 80
Channel Legs In at 1200mm Ø *	mm	UPN 80
* With optional special rolls
Technical Specification
Motor Power	kW	1.5
Top Roll Diameter	mm	152
Lower Rolls Diameter	mm	162
Shaft Diameter	mm	50
Bending Speed	m/min	4.5
Length	mm	1000
Width	mm	750
Height	mm	1600
Weight	kg	510

View More Products From This Range

The Bison Blog

View All Blog Articles

A unique solution for welding fume extraction

In recent years, the Health and Safety Executive (HSE) has placed welding fumes under closer scrutiny, with scientific evidence linking exposure to a range of health issues, including lung cancer, neurological disorders, and asthma. Employers have a duty to provide a safe and healthy working environment for their staff, which includes putting effective controls in place to manage exposure to welding fumes — general ventilation on its own is not enough to adequately mitigate the risks. Although welders themselves may be adequately protected by PPE, the HSE has placed particular emphasis on other employees who share the same workspace.

Carbon Footprint Reduction for UK Metal Fabricators: Where to Start

Net zero isn't just a government target, it's increasingly a commercial reality. More and more UK manufacturers are being asked by their customers to demonstrate their environmental credentials, and fabrication businesses that can't answer that question are starting to lose work to those that can.

Autorolling© - Combining Davi’s three most advanced technologies

In today’s metal fabrication landscape, precision, efficiency, and sustainability are no longer optional—they are baseline requirements. Davi Autorolling© answers this demand by unifying three breakthrough technologies into a single, intelligent plate rolling ecosystem.

Navigating the Challenges of Compliance in Structural Steel Fabrication

If you spend any time in a modern steel fabrication workshop, you’re likely to hear the same theme repeated: compliance has become tougher, more scrutinised and more central to winning work. Clients want reassurance, auditors want documentation, and insurers want evidence...