The Morgan Rushworth HSR-3 range of hydraulic section bending machines are designed to roll various material sections and are available with shaft diameters from 50mm up to 120mm. All models have twin rams powering both of the lower rolls, providing pre bending capability and the convenience of performing the bending operation with the material in the horizontal position. All of the HSR-3 machines can be operated in either vertical or horizontal plain. The standard rolls supplied with the machine are hardened and have been designed to bend most sections, avoiding the cost of additional tooling. Lateral guide rolls ensure straight and true bending, or if required can be adjusted in order to spiral the material.
| Model | HSR-3 120.390 | |
| Flat Bar on Edge at 1200mm Ø | mm | 125 x 25 |
| Flat Bar as Flat at 1000mm Ø | mm | 200 x 50 |
| Square Bar at 750mm Ø | mm | 65 x 65 |
| Round Bar at 850mm Ø | mm | 80 |
| Round Tube at 2800mm Ø | mm | 160 x 4 |
| Round Pipe at 1500mm Ø | mm | 141.3 x 6.5 |
| Rectangular Hollow Section at 1800mm Ø | mm | 120 x 40 x 4 |
| Square Hollow Section at 1800mm Ø | mm | 90 x 90 x 5 |
| Angle Iron Toe Out at 1200mm Ø | mm | 120 x 120 x 12 |
| Angle Iron Toe In at 1200mm Ø | mm | 100 x 100 x 10 |
| Tee Section Toe Out at 800mmØ | mm | 100 x 100 x 11 |
| Tee Section Toe In at 1000mm Ø | mm | 100 x 100 x 11 |
| Tee Section Toe Up/Down at 800mm Ø | mm | 100 x 100 x 11 |
| Channel Legs Out at 1000mm Ø | mm | 220 x 80 x 9 |
| Channel Legs In at 1200mm Ø | mm | 220 x 80 x 9 |
| H Beam at 1000mm Ø | mm | 220 x 98 x 12 |
| I Beam at 5000mm Ø | mm | 160 x 74 x 9.5 |
| Power | kW | 15 |
| Rolls Diameter | mm | 390 |
| Shafts Diameter | mm | 120 |
| Bending Speed | m/min | 2 - 7.5 |
| Length | mm | 2000 |
| Width | mm | 1650 |
| Height | mm | 1900 |
| Weight | Kg | 4770 |
Plate rolling may look like a straightforward processes until you're standing in front of the a machine that is unsuitable for the task. This guide cuts through the options so you can make the right choice for your specific operation.
Read More
Read More
In modern metal manufacturing, staying competitive requires balancing speed, precision, and operational efficiency. Traditional tube processing methods, such as sawing, drilling, punching, and manual deburring, are notoriously labor-intensive and prone to human error. Each additional handling stage introduces potential for delay, increased costs, and inconsistency.
Read More
Read More
UK defence spending is rising at a pace not seen since the Cold War, and for metal fabricators with the right capabilities, that represents a significant commercial opportunity. Understanding where the demand is coming from, and what it means for workshop investment, is worth the attention of any fabrication business looking to grow.
Read More
Read More
In recent years, the Health and Safety Executive (HSE) has placed welding fumes under closer scrutiny, with scientific evidence linking exposure to a range of health issues, including lung cancer, neurological disorders, and asthma. Employers have a duty to provide a safe and healthy working environment for their staff, which includes putting effective controls in place to manage exposure to welding fumes — general ventilation on its own is not enough to adequately mitigate the risks. Although welders themselves may be adequately protected by PPE, the HSE has placed particular emphasis on other employees who share the same workspace.
Read More
Read MoreEnquire About: "Morgan Rushworth HSR-3 120.390 Hydraulic Section Ring Rolling Machine"
