The Morgan Rushworth HSR-3 range of hydraulic section bending machines are designed to roll various material sections and are available with shaft diameters from 50mm up to 120mm. All models have twin rams powering both of the lower rolls, providing pre bending capability and the convenience of performing the bending operation with the material in the horizontal position. All of the HSR-3 machines can be operated in either vertical or horizontal plain. The standard rolls supplied with the machine are hardened and have been designed to bend most sections, avoiding the cost of additional tooling. Lateral guide rolls ensure straight and true bending, or if required can be adjusted in order to spiral the material.
| Model | HSR-3 80.245 | |
| Flat Bar on Edge at 800mm Ø | mm | 80 x 20 |
| Flat Bar as Flat at 600mm Ø | mm | 125 x 25 |
| Square Bar at 500mm Ø | mm | 45 x 45 |
| Round Bar at 500mm Ø | mm | 50 |
| Round Tube at 1200mm Ø | mm | 100 x 2.5 |
| Round Pipe at 800mm Ø | mm | 88.9 x 5.5 |
| Rectangular Hollow Section at 800mm Ø | mm | 80 x 25 x 3 |
| Square Hollow Section at 1300mm Ø | mm | 70 x 70 x 3 |
| Angle Iron Toe Out at 800mm Ø | mm | 80 x 80 x 8 |
| Angle Iron Toe In at 700mm Ø | mm | 70 x 70 x 7 |
| Tee Section Toe Out at 800mm Ø | mm | 80 x 9 |
| Tee Section Toe In at 800mm Ø | mm | 70 x 8 |
| Tee Section Toe Up/Down at 800mm Ø | mm | 80 x 9 |
| Channel Legs Out at 900mm Ø | mm | UPN 120 |
| Channel Legs In at 1000mm Ø | mm | UPN 120 |
| Power | kW | 4 |
| Rolls Diameter | mm | 245 |
| Shafts Diameter | mm | 80/70 |
| Bending Speed | m/min | 6 |
| Length | mm | 1450 |
| Width | mm | 1000 |
| Height | mm | 1400 |
| Weight | Kg | 1700 |
UK defence spending is rising at a pace not seen since the Cold War, and for metal fabricators with the right capabilities, that represents a significant commercial opportunity. Understanding where the demand is coming from, and what it means for workshop investment, is worth the attention of any fabrication business looking to grow.
Read More
Read More
In recent years, the Health and Safety Executive (HSE) has placed welding fumes under closer scrutiny, with scientific evidence linking exposure to a range of health issues, including lung cancer, neurological disorders, and asthma. Employers have a duty to provide a safe and healthy working environment for their staff, which includes putting effective controls in place to manage exposure to welding fumes — general ventilation on its own is not enough to adequately mitigate the risks. Although welders themselves may be adequately protected by PPE, the HSE has placed particular emphasis on other employees who share the same workspace.
Read More
Read More
Net zero isn't just a government target, it's increasingly a commercial reality. More and more UK manufacturers are being asked by their customers to demonstrate their environmental credentials, and fabrication businesses that can't answer that question are starting to lose work to those that can.
Read More
Read More
In today’s metal fabrication landscape, precision, efficiency, and sustainability are no longer optional—they are baseline requirements. Davi Autorolling© answers this demand by unifying three breakthrough technologies into a single, intelligent plate rolling ecosystem.
Read More
Read MoreEnquire About: "Morgan Rushworth HSR-3 80.245 Hydraulic Section Ring Rolling Machine"
