MG AR 200 Hydraulic Section Ring Rolling Machine

The MG AR Line section rolls are available in a huge range of capacities from 60mm shaft diameter up to an enormous 540mm shaft diameter; this model AR530 weighs in at an incredible 297 tonnes and has the capacity to roll beams of up to 1000mm. These superb quality Italian built machines are of a double pre-bending design and feature three rolls individually driven by powerful hydraulic motors via planetary gearboxes. The universal rolls supplied can roll a whole spectrum of standard sections and profiles, while special tooling is available for tubes or specific profiles. A wide range of optional equipment is offered including special attachments for the rolling of spirals and a very user friendly touch screen NC control.

MG AR 200 Hydraulic Section Ring Rolling Machine
Download PDF Spec Sheet MG AR 200 Hydraulic Section Ring Rolling Machine Download PDF Spec Sheet

Download
PDF Spec Sheet

Read More MG AR 200 Hydraulic Section Ring Rolling Machine Read More

Read
More

Get In Touch Get In Touch

Get In
Touch

Features

  • Double pre-bending design
  • All three rolls driven for excellent traction
  • Rolls driven by powerful hydraulic motors with planetary gearboxes
  • Universal hardened rolls suitable to roll a wide range of profiles
  • Smooth rolls ensure minimal material marking
  • Permanent lubrication to main machine components during manufacture
  • Double spherical roller bearings for rolls shafts in place of traditional bushes
  • Hydraulic lateral guide rolls with movement in 3 axis
  • Moveable control panel
  • Digital read outs indicating both lower roll positions

Options

  • Special rolls for tubes and other profiles
  • Special rolls in nylon for sensitive materials
  • Traction and compression tooling
  • Overhead support
  • Spiral staircase device
  • Coiling attachments
  • Lateral guide roll extension for rolling small coils
  • Digital read outs for lateral roll positions
  • NC Control Unit
  • CNC Control Unit

Technical Information

Flat Bar on Edge at 2200mm Ø mm 180 x 45
Flat Bar as Flat at 2300mm Ø mm 280 x 60
Square Bar at 3400mm Ø mm 115 x 115
Round Bar at 200mm Ø mm 135
Round Tube at 8000mm Ø  mm

273 x 9

Rectangular Hollow Section at 6000mm Ø mm 200 x 100 x 8
Square Hollow Section at 6000mm Ø mm 180 x 180 x 12
Angle Iron Toe Out at 5400mm Ø mm 200 x 200 x 20
Angle Iron Toe In at 5400mm Ø mm 180 x 180 x 18
Tee Section Toe Out at 6300mm Ø mm 200 x 200 x 18
Tee Section Toe In at 6300mm Ø mm 200 x 200 x 18
Tee Section Toe Up/Down at 6300mm Ø mm 200 x 200 x 18
Channel Legs Out at 6300mm Ø mm UPN 280
Channel Legs In at 6300mm Ø mm UPN 280
I Beam Flanges Vertical at 7500mm Ø mm IPE 280
Maximum Section Modulus cm³ 1860
Shaft Diameter mm 210
Roll Diameter mm 650
Rolling Speed m/min 5
Motor Power kW 30
Length mm 2977
Width mm 2970
Height mm 2850
Weight kg 24000
Would you buy a 20 year old computer?

Would you buy a 20 year old computer?

This is an interesting question to which most of us would answer ‘No’! Imagine your PC failing and taking a trip out to the computer store to browse a selection of used PCs from 1999. Probably running Windows 95 or with a bit of luck perhaps Windows 98 (you’ll pay extra for that!).

Read More

Read More
Single Gas or High Definition Plasma Cutting?

Single Gas or High Definition Plasma Cutting?

​Need to invest in plasma but unsure of whether you need single gas plasma or a high definition plasma? For many applications single gas plasma cutting will produce a perfectly satisfactory cut although there are some limitations that you need to be aware of. In general a single gas plasma will create more bevel on the cut edge at production speeds and can only produce acceptable holes at a higher diameter to plate thickness ratio than high definition plasma.

Read More

Read More
The Bison 360° Showroom Tour is Live!

The Bison 360° Showroom Tour is Live!

Wanting to visit but too busy to get away? Or just like browsing through sheet metal and fabrication machinery? We understand - it gets into your blood! Now you can view the Bison showroom from the comfort of your web browser or even using a VR headset.

Read More

Read More
Product Launch - RVD Tube Laser Cutting Machines

Product Launch - RVD Tube Laser Cutting Machines

We are pleased to now offer the excellent RVD tube laser cutting machines, bringing an affordable laser cutting solution for processing of a huge variety of tubular sections and profiles. Specified with market leading components such as nLIGHT fibre laser and a RayTools cutting head, these high quality machines make light work of tasks which would take many times longer using conventional methods.

Read More

Read More
  • Follow Our Social Channels