MG AR 160 Hydraulic Section Ring Rolling Machine

The MG AR Line section rolls are available in a huge range of capacities from 60mm shaft diameter up to an enormous 540mm shaft diameter; this model AR530 weighs in at an incredible 297 tonnes and has the capacity to roll beams of up to 1000mm. These superb quality Italian built machines are of a double pre-bending design and feature three rolls individually driven by powerful hydraulic motors via planetary gearboxes. The universal rolls supplied can roll a whole spectrum of standard sections and profiles, while special tooling is available for tubes or specific profiles. A wide range of optional equipment is offered including special attachments for the rolling of spirals and a very user friendly touch screen NC control.

MG AR 160 Hydraulic Section Ring Rolling Machine
Download PDF Spec Sheet MG AR 160 Hydraulic Section Ring Rolling Machine Download PDF Spec Sheet

Download
PDF Spec Sheet

Read More MG AR 160 Hydraulic Section Ring Rolling Machine Read More

Read
More

Get In Touch Get In Touch

Get In
Touch

Features

  • Double pre-bending design
  • All three rolls driven for excellent traction
  • Rolls driven by powerful hydraulic motors with planetary gearboxes
  • Universal hardened rolls suitable to roll a wide range of profiles
  • Smooth rolls ensure minimal material marking
  • Permanent lubrication to main machine components during manufacture
  • Double spherical roller bearings for rolls shafts in place of traditional bushes
  • Works in either horizontal or vertical orientation
  • Hydraulic lateral guide rolls with movement in 3 axis
  • Moveable control panel
  • Digital read outs indicating both lower roll positions

Options

  • Special rolls for tubes and other profiles
  • Special rolls in nylon for sensitive materials
  • Traction and compression tooling
  • Overhead support
  • Spiral staircase device
  • Coiling attachments
  • Lateral guide roll extension for rolling small coils
  • Digital read outs for lateral roll positions
  • NC Control Unit
  • CNC Control Unit

Technical Information

Flat Bar on Edge at 1500mm Ø mm 150 x 40
Flat Bar as Flat at 1800mm Ø mm 240 x 50
Square Bar at 2500mm Ø mm 95 x 95
Round Bar at 1650mm Ø mm 110
Round Tube at 3000mm Ø  mm

168.3 x 7

Rectangular Hollow Section at 3000mm Ø mm 180 x 70 x 8
Square Hollow Section at 3800mm Ø mm 125 x 125 x 10
Angle Iron Toe Out at 3800mm Ø mm 150 x 150 x 12
Angle Iron Toe In at 3000mm Ø mm 120 x 120 x 10
Tee Section Toe Out at 2000mm Ø mm 150 x 150 x 13
Tee Section Toe In at 2000mm Ø mm 150 x 150 x 13
Tee Section Toe Up/Down at 2000mm Ø mm 150 x 150 x 13
Channel Legs Out at 4500mm Ø mm UPN 240
Channel Legs In at 4500mm Ø mm UPN 240
I Beam Flanges Vertical at 4500mm Ø mm IPE 240
Maximum Section Modulus cm³ 420
Shaft Diameter mm 160
Roll Diameter mm 485
Rolling Speed m/min 5
Motor Power kW 18.5
Length mm 2008
Width mm 1973
Height mm 1975
Weight kg 6800
Press brake or CNC folder?

Press brake or CNC folder?

When adding bending capacity to a sheet metal workshop, the question comes up as to whether to purchase a press brake or a CNC folding machine. Actually a busy sub-contract sheet metal shop can save time and money by having both machines. So the question for you could be ‘why add a CNC folder to your plant list?’ For those making a product there are applications which favour either process, so it is helpful to review what these machines do differently. Sometimes it’s two ways to the same end, but read on to find out the most important considerations……

Read More

Read More
Choosing a steelworker - is a single or twin cylinder model best for you?

Choosing a steelworker - is a single or twin cylinder model best for you?

Multi station steelworkers - sometimes called ironworkers - are versatile machines which can benefit most fabrication workshops. They are typically available in either a single or a twin cylinder design, each having its own particular features. It is advisable to carefully review which design would work best for you; the single cylinder models are attractively priced, but there are some limitations which need to be considered. Let’s take a look at the most important differences…..

Read More

Read More
Which guillotine options would have the most impact on your productivity?

Which guillotine options would have the most impact on your productivity?

Choosing a guillotine can be a minefield in itself, added to which there are a wide range of options available for different tasks. Depending on your requirements these range from the merely ‘nice to have’ to being critical to getting the job done in a timely fashion. If you have decided to invest in a new powered guillotine, it is worth spending some time reviewing the available options to make sure it not only performs the basic function but actually makes your production more efficient. So what are the most common options and what do they do for you?

Read More

Read More
Hypertherm XPR300 Plasma & Morgan Rushworth

Hypertherm XPR300 Plasma & Morgan Rushworth

This month Hypertherm have launched their all new XPR300 which is the first of a new class of mechanised plasma featuring their new X-DefinitionTM technology. This technology brings significant advantages to the cutting process, affecting not only mild steel cutting but also bringing industry leading cut quality to stainless steel and aluminium.

Read More

Read More
  • Follow Our Social Channels