MG AR 110 Hydraulic Section Ring Rolling Machine

The MG AR Line section rolls are available in a huge range of capacities from 60mm shaft diameter up to an enormous 540mm shaft diameter; this model AR530 weighs in at an incredible 297 tonnes and has the capacity to roll beams of up to 1000mm. These superb quality Italian built machines are of a double pre-bending design and feature three rolls individually driven by powerful hydraulic motors via planetary gearboxes. The universal rolls supplied can roll a whole spectrum of standard sections and profiles, while special tooling is available for tubes or specific profiles. A wide range of optional equipment is offered including special attachments for the rolling of spirals and a very user friendly touch screen NC control.

MG AR 110 Hydraulic Section Ring Rolling Machine
Download PDF Spec Sheet MG AR 110 Hydraulic Section Ring Rolling Machine Download PDF Spec Sheet

PDF Spec Sheet

Read More MG AR 110 Hydraulic Section Ring Rolling Machine Read More


Get In Touch Get In Touch

Get In


  • Double pre-bending design
  • All three rolls driven for excellent traction
  • Rolls driven by powerful hydraulic motors with planetary gearboxes
  • Universal hardened rolls suitable to roll a wide range of profiles
  • Smooth rolls ensure minimal material marking
  • Permanent lubrication to main machine components during manufacture
  • Double spherical roller bearings for rolls shafts in place of traditional bushes
  • Works in either horizontal or vertical orientation
  • Hydraulic lateral guide rolls with movement in 3 axis
  • Moveable control panel
  • Digital read outs indicating both lower roll positions


  • Special rolls for tubes and other profiles
  • Special rolls in nylon for sensitive materials
  • Traction and compression tooling
  • Overhead support
  • Spiral staircase device
  • Coiling attachments
  • Lateral guide roll extension for rolling small coils
  • Digital read outs for lateral roll positions
  • NC Control Unit
  • CNC Control Unit

Technical Information

Flat Bar on Edge at 1400mm Ø mm 110 x 25
Flat Bar as Flat at 1000mm Ø mm 180 x 30
Square Bar at 1200mm Ø mm 60 x 60
Round Bar at 750mm Ø mm 75
Round Tube at 2800mm Ø  mm

140 x 3

Rectangular Hollow Section at 1200mm Ø mm 100 x 50 x 5
Square Hollow Section at 2000mm Ø mm 90 x 90 x 5
Angle Iron Toe Out at 2000mm Ø mm 100 x 100 x 10
Angle Iron Toe In at 2600mm Ø mm 90 x 90 x 10
Tee Section Toe Out at 1600mm Ø mm 100 x 100 x 12
Tee Section Toe In at 1600mm Ø mm 100 x 100 x 12
Tee Section Toe Up/Down at 1600mm Ø mm 100 x 100 x 12
Channel Legs Out at 1200mm Ø mm UPN 160
Channel Legs In at 1200mm Ø mm UPN 160
I Beam Flanges Vertical at 2000mm Ø mm IPE 160
Maximum Section Modulus cm³ 157
Shaft Diameter mm 110
Roll Diameter mm 350
Rolling Speed m/min 5
Motor Power kW 7.5
Length mm 1600
Width mm 1496
Height mm 1475
Weight kg 2950
We're staying open...

We're staying open...

Bison Machinery remains open to serve our customers as required; in the main we are working remotely but management will continue to open the premises and despatch any urgent consumables or spare parts. Our engineers are still visiting customers in essential industries who need them and our phone lines will remain open.

Read More

Read More
Servo Electric Press Brake - Coming Soon to the Bison Showroom

Servo Electric Press Brake - Coming Soon to the Bison Showroom

Already having one of the largest machinery showrooms in the UK, we are pleased to announce that we will soon be adding a Morgan Rushworth Servo Electric Press Brake to our showroom stock. We are expecting to receive the machine this month and will be offering demonstrations from early April. This will be of interest to users of hydraulic press brakes that want to save time and money by reducing electrical usage and maintenance, while increasing cycle times.

Read More

Read More
Press brake or CNC folder?

Press brake or CNC folder?

When adding bending capacity to a sheet metal workshop, the question comes up as to whether to purchase a press brake or a CNC folding machine. Actually a busy sub-contract sheet metal shop can save time and money by having both machines. So the question for you could be ‘why add a CNC folder to your plant list?’ For those making a product there are applications which favour either process, so it is helpful to review what these machines do differently. Sometimes it’s two ways to the same end, but read on to find out the most important considerations……

Read More

Read More
Our machinery brands; Sterling

Our machinery brands; Sterling

We have been supply Sterling sawing machinery since the late 1990’s. In those years we saw a lot of success with basic straight cut engineering machines and their original twin pillar tube cutting models. Since then the range has expanded to include circular saws, vertical bandsaws and a much wider range of horizontal bandsaws. So what does Sterling offer you today?

Read More

Read More
  • Follow Our Social Channels